|
孔洞或杂质
Porosity or Inclusions |
表面洁净无肉眼可见裂痕，刮伤，杂质，变形等缺陷；Thetarget surface clean without eye visible defects such as cracks, scratches, inclusions, and other deformations
靶材无直径大于 2mm 的孔洞；直径在 0.5~2mm 之间的孔洞，100*100mm 内不超过 3 个，整个靶材不超过 5 个，孔洞深度不超过 2mm；直径（0.1~0.5） mm 的孔洞在旋转靶表面宽度为 100mm 的环形区域不多于 10 个。Without void diameter larger than 2mm in hole target; Void diameter of 0.5~ 2mm, not more than 3 in 100*100mm, should not exceed 5in the hole target, the void depth should not exceed 2mm; The diameter of voids(0.1~0.5)mm is not
more 10 circular areas with a width of 100mm on the rotating target surface |
|
靶材尺寸Dimension (mm) |
旋转靶Rotatable target:
常规尺寸：狗骨，钢管直径 OD133mm/ID125mm，靶管厚度 9/13mm：长度
≤4m。
Regular size: Dog-bone target, SST diameter is OD133/ID125, Target thickness is9/13mm：Length≤4m
其他尺寸按图纸要求加工。According to the drawing for other dimensions |
